Détails essentiels
MOQ:500 kg
Poids net:25 kg
Introduction du produit
TPU - Specific
Halogen - free Flame Retardant
XF - 8602E
| Product and Usage Characteristics | Unit | XF - 8602E |
| Phosphorus Content | % | ≥10 |
| Nitrogen Content | % | ≥20 |
| Volatile Matter | % | ≤0.3 |
| Relative Density | g/cm³ | ≤1.3 |
| Average Particle Size (D50) | μm | ≤30 |
| Thermal Decomposition Temperature | °C | ≥280 |
| Recommended Extrusion Temperature | °C | ≤210 |
The processing temperature should be appropriate to avoid the decomposition of the flame retardant due to high temperature. Although the thermal decomposition temperature of this product is greater than 280°C, due to the high shear heat of the screw, if the set screw temperature is too high, the heat - superposition effect caused by heating and shearing is likely to occur, resulting in local overheating of the screw and decomposition of the flame retardant.
- This product should be stored in a cool and dry place. Use it as soon as possible if the packaging is damaged.
- If the packaging is broken or damp, dry it at 100°C ± 10°C for 2 hours before use.
- The above technical parameters are for reference. The actual technical parameters shall be subject to the factory COA or technical agreement.
- The data and information in the application guide and cases are for reference only and shall not be used as product quality standards.
25kg/ bag;
Transport according to general chemicals and store in a dry and cool place to avoid direct sunlight.